Stunt & Tactical Equipment
Price on Application
The Helix R3 Waist Harness is comprised of the Riggers Belt and Leg Loops, and has been designed specifically for military operational use for a wide range of missions and tasks across all environments. The harness is certified to EN12277 (mountaineering equipment-harness) Type C. The belt is 45mm wide and will fit into standard belt loops. It is sized so that it can take molle attachments and is stiff enough to take heavier equipment such as holsters and mission specific equipment. The triple lock, corrosion resistant buckle requires three separate actions to release it which means it can't be accidentally opened. The belt can be used with the buckle on the left or right depending on user preference. The belt is fully adjustable, and the excess material can be stowed away. The material is lightweight and has minimal volume to reduce water absorption and drying time. The outside of the belt uses fine velcro, allowing battle belts to be positioned on top of the belt thus minimising movement. The belt includes a low profile textile belay loop on the front, which allows the user to quickly connect to an anchor or system using a tested belt with full confidence that it meets high access criteria. When not in use, the belay loop can be stowed away. Two gear loops are provided in the pack and extra sets are available as an optional extra. These velcro into position onto the harness in any position determined by the user. The leg loops are very light and compact using a synthetic mesh to minimise their bulk and moisture retention. Available in one size, weighing just 260g. The loops are fully adjustable using the same triple lock buckles as the harness. The leg loops can be added to create a sit harness in less than 15 seconds. The Riggers Belt, Leg Loops and gear loops can be purchased as separate products with sizes ranging from small to x-large for the belt and one size for the leg and gear loops. The waist harness, belt, leg loops and gear loops are all available in either black, coyote brown or khaki green colourways.The belt is sized to fit through standard belt loops and is rigid enough to support Molle attachments and pistol holders.
The Caritool Solid Gate Tool Holder allows the user to select and return tools with just one hand with a protected gate that limits accidental snagging available in two sizes.
The Liros Shock Cord Bungee is a great high-elasticity shock cord with the best in stretch characteristics. Braided out of abrasion resistant Polyester yarn.
A tighter weave on the mantel increases abrasion resistance and durability for improved compatibility with rope grabs and devices.
TTC endless slings are an inexpensive and lightweight accessory used in everyday lifting. They can be used to lift, lash and move just about anything. A staple in a vast array of industries.
TTC endless slings are an inexpensive and lightweight accessory used in everyday lifting. They can be used to lift, lash and move just about anything. A staple in a vast array of industries.
The Lyon 18 mm sling , made from strong tubular tape and sewn in an endless loop, is ideal for applications requiring reduced width.
DMM Nylon slings offer far greater durability, shock absorption, cost effectiveness and even a higher melting point than their Dynatec counterparts.
Maillons are very much a stronger connector than carabiners. They are available in different shapes and are designed to be able to cope with rigging in multi-directional loads.
This is the strongest tape in our range. It might not have some of the weight advantages of the skinnier Dynatec slings, but if you are looking for a sturdy, hard wearing sling, this is it.
Maillons are very much a stronger connector than carabiners. They are available in different shapes and are designed to be able to cope with rigging in multi-directional loads.
A great accessory for mountaineering, ice and multi-pitch climbing, the Petzl Caritool allows quick access and organization of ice screws, pitons, nuts... etc. This allows for quick storage/holstering of ice tools. Compatible with the slots on most Petzl harnesses and also attaches to the webbing waistbelts of other harnesses.
The DMM XSRE Wire features an offset oval wiregate and I-Beam construction for optimum strength to weight ratio, the wire gate option is also the most affordable XSRE carabiner in our range.
Maillons are very much a stronger connector than carabiners. They are available in different shapes and are designed to be able to cope with rigging in multi-directional loads.
The DMM XSRE is a lightweight, 8g accessory carabiner with a snag-free keylock nose, strong 4kN rating, and I-Beam construction for optimal strength-to-weight performance.
The lanyard connector holders install on the shoulder straps of VOLT, VOLT WIND, AVAO BOD, AVAO BOD FAST and ASTRO BOD FAST harnesses and TOP, TOP CROLL S and TOP CROLL L chest harnesses. They provide stowage for the MGO connectors on fall arrest lanyards, on each shoulder strap, allowing the user to be unhindered by the lanyard and to keep the connectors within reach. In the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed. Comes in a pack of 2.
The Petzl Steel Oxan Screw Lock Carabiner is ideal for use in difficult environments. The high-strength steel construction creates major axis strength of up to 38kN while keeping weight down to as little as 185g.
The Black Diamond HotForge Screwgate Carabiner is a versatile, lightweight, and durable keylock locker, perfect for everyday climbing. The non-snagging nose ensures smooth clipping, making it an ideal choice for any situation where a reliable locker is essential.
The Rope Marker is an essential accessory for climbers to mark the midpoint of their rope. Its innovative applicator ensures smooth and even use, preventing the rope from stiffening. Designed to Beal Rope Marker, the markings are durableeven in extreme conditions. Thanks to its wide, ergonomic applicator, every mark is precise and clean.
Crafted with hot-forge construction, the LiteForge Screwgate Carabiner optimises weight while maintaining strength where it matters most. Its non-snagging keylock nose ensures smooth clipping and cleaning, enhancing your climbing experience. The screwgate sleeve adds security, keeping the gate closed during critical moments on the rock.
The Black Diamond RockLock Screwgate Carabiner is the ultimate locking carabiner for climbers who demand reliability and performance. As Black Diamond’s largest locking carabiner, the RockLock excels in belaying, rappelling, and building anchors. Its hot-forged lightweight construction enhances durability without adding unnecessary weight, making it perfect for serious climbing sessions.
The adjustable Petzl Footape Ascender is used in conjunction with the Ascension handled ascender for working through rope ascents. Typically used in rope access industries.
The DMM Tool Bag is an essential piece of equipment for any technician who has to carry equipment to a worksite at height. Heavy duty fabrics and semi-rigid 'Equal D' cylinder shape make it free standing for easy loading and the easy opening/closing top makes it simple to use. Multiple clipping and racking options help organization of tools and keep dropped object potential to a minimum. The 6 litre bag is tall enough to fit most longer tools such as spanners and hammers, whilst the 4 litre bag is perfect for carrying smaller pieces of kit. We always recommend using lanyards on tools whilst working at height.