Tactical

DMM Nylon slings offer far greater durability, shock absorption, cost effectiveness and even a higher melting point than their Dynatec counterparts.

The adjustable Petzl Footape Ascender is used in conjunction with the Ascension handled ascender for working through rope ascents. Typically used in rope access industries.

Maillons are very much a stronger connector than carabiners. They are available in different shapes and are designed to be able to cope with rigging in multi-directional loads.

The Canvas Rope Protectors are popular for situations where a localised area of rope protection is required from limited abrasion. With a durable dual layer canvas construction, they can be installed directly on the rope or secured to the structure using a combination of the attached cord plus the hook and loop closures provided.

TTC endless slings are an inexpensive and lightweight accessory used in everyday lifting. They can be used to lift, lash and move just about anything. A staple in a vast array of industries. Also available for hire.

Can't see the size you're looking for? Check out our Hatt Equipment Round Slings for our full range

Sm'D is a D-shaped locking carabiner that is lightweight, and compact, and can be used in numerous situations; it is easy to manipulate, even when wearing gloves, and is available in two locking system versions.

This is the strongest tape in our range. It might not have some of the weight advantages of the skinnier Dynatec slings, but if you are looking for a sturdy, hard wearing sling, this is it.

Handled rope clamp for rope ascents, the Ascension features an over moulded grip and ergonomic upper part for a comfortable and powerful grip when pulling with one or two hands. The Ascension handled rope clamp has a wide lower hole for easily attaching two carabiners for a lanyard and footloop.

This three-pack is ideal for climbers seeking dependable gear for everyday adventures. Each carabiner combines performance and ease of use, making them essential tools for any climbing mission. Built to withstand the demands of the rock face, the HotForge Screwgate Carabiner 3 Pack is ready to tackle your climbing challenges. Equip yourself with these reliable lockers and experience peace of mind on your next ascent. Whether you're a seasoned pro or a weekend warrior, these carabiners have you covered.

The Petzl Steel Oxan Screw Lock Carabiner is ideal for use in difficult environments. The high-strength steel construction creates major axis strength of up to 38kN while keeping weight down to as little as 185g.

CLEARANCE SALE - 30% off. Divide the circular length by 2 to get the Effective Working Length (EWL).

TTC endless slings are an inexpensive and lightweight accessory used in everyday lifting. They can be used to lift, lash and move just about anything. A staple in a vast array of industries. Also available for hire.

Can't see the size you're looking for? Check out our Hatt Equipment Round Slings (EWL) for our full range

The DMM XSRE Lock is a compact, high-performance accessory carabiner with a secure screwgate locking mechanism, ideal for both industrial gear organization and everyday use.

The DMM XSRE is a lightweight, 8g accessory carabiner with a snag-free keylock nose, strong 4kN rating, and I-Beam construction for optimal strength-to-weight performance.

The Petzl Protec flexible protector is designed to protect a fixed rope from abrasion when working at height or during rescue. Easy to install, durable and versatile, the Protec fits most rope diameters used by professionals, as well as anchor straps.

The Petzl Rig Descender is a compact self-braking descender for rope access, designed for experienced users. It has an ergonomic handle that allows comfortable descent control.

Petzl’s Oxan carabiner is ideal for use in difficult environments. The high-strength steel construction creates major axis strength of up to 38kN while keeping weight down to as little as 185g. The symmetrical oval shape makes the Oxan easy to handle, allowing optimal loading of the carabiner in a wide range of situations. The design also allows Oxan to be connected to Petzl’s Captiv bar to keep the carabiner in ideal position, limiting the risk of it flipping and ensuring it remains integrated with the device. Two locking systems are available. Firstly, the automatic Triact-Lock system, with triple-action gate opening. Alternatively, the manual Screw-Lock system is available, with a red band providing a visual warning of an unlocked carabiner.

A well balanced all-rounder. The DMM Worksafe rope is the perfect low-stretch rope for most rope access, work positioning, work restraint and fall arrest systems. Designed to compliment our Catch back up device where the dynamics are safe and consistent in use.

The Omni-Block combines a swivel and pulley into one tool and incorporates a unique side plate that opens while the pulley is still attached to the anchor. Traditionally, a pulley is connected to a swivel by a carabiner. However, the Omni eliminates the need for the carabiner, reducing length and pieces of equipment in the rigging system. The short length of the Omni is important when used in high-angle, confined space or other space-sensitive rigging environments. The reduced weight of the Omni will make hauling your gear easier. Additionally, the Omni side plate can be opened without detaching from the carabiner. Traditional pulleys require removing from the carabiner to change the rope. With the Omni, the user is able to do this while the pulley is still secured. Available in single and double sheave versions from 1.1" radius up to 2.6". Made in the USA.

Combining a swivel and a pulley into one tool, the Rock Exotica Omni-Block 2.0 single rigging pulley incorporates a side plate that can open with the pulley still attached to the anchor.

Available in three sizes, the Paw rigging plate allows the organizing of the workstation and setup of multi-anchor systems. The hole design allows ropes or slings to be threaded for direct connection. Made of forged aluminium, it offers an excellent strength-to-weight ratio.

The Petzl Couer is a standard steel hanger for non-permanent or interior installations. As you’d expect from Petzl, the Couer includes a number of features to improve ease of use and versatility. The wide, ergonomic connection point allows for two carabiners to be simultaneously installed, while the rounded edges of the connection point minimises wear on connectors. The Petzl Couer also features a textured anti-rotation system that prevents the hanger from turning during installation or while it is laterally loaded during use. The Couer is available for 10 or 12mm bolts and in singles or packs of 20, ensuring you can buy exactly what you need.

The Petzl Grillon adjustable lanyard complements a fall-arrest system, helping to position users safely for work. The Grillon is designed to be very precisely and quickly adjusted, ensuring a user remains in a comfortable and safe position while working at height. The Grillon can be used in single or double mode, making it suitable for any position users work in. The Petzl Grillon lanyard is available in lengths between 2 and 20 metres and is certified to European, North American and Russian safety standards.

Petzl’s Oxan carabiner is ideal for use in difficult environments. The high-strength steel construction creates major axis strength of up to 38kN while keeping weight down to as little as 185g. The symmetrical oval shape makes the Oxan easy to handle, allowing optimal loading of the carabiner in a wide range of situations. The design also allows Oxan to be connected to Petzl’s Captiv bar to keep the carabiner in ideal position, limiting the risk of it flipping and ensuring it remains integrated with the device. Two locking systems are available. Firstly, the automatic Triact-Lock system, with triple-action gate opening. Alternatively, the manual Screw-Lock system is available, with a red band providing a visual warning of an unlocked carabiner.